Power Boat
     Bowdidge
Marine Designs
Yacht, multihull and sailboat designs
@ WEB DESIGN BY BOWDIDGE MARINE DESIGNS

         We have boat plans (both yacht designs, catamaran designs and power designs) for all sizes. From the 12ft Mushulu Dinghy stitch & glue yacht tender to the Oceansky 57 catamaran. We design timber boats, plywood boats, strip plank boats, fibreglass composite boats, steel and aluminum boats to very modern styling for both monohull designs or multihull designs, powerboat or sailboat and in round bilge, multi-chine or radius chine hull forms.

The Path to your Dreams, may take you places...
You've never Imagined.
Latest New Design 4.87 (16ft) Offshore Centre Console
Updated: 13th /Jul

G'day Mark.
Here's my latest pictures of my Mushulu 14 build.
I've also included a few exrtrra showing the differences in size etc between the Mushulu 12 and the Mushulu 14 as well.
regards
Bruce

Click image

G'day everybody,
Here's the 2nd of our next generation of our 4 new exciting designs now on the drawing board. Constructed from Strip Plank composite, or foam core, her deep "V" 20 degree deadrise for a smooth ride, chine flats for stability and flaired bows, we look forward to yet another Bowdidge Marine signature design

Updated: 20th /May
   Boat Plans
To view his build pictures.
Eddie's Cruise Control 5.2
Latest News & Updates
   Our Workshop News
     Click above Image
Click Image
To view his build pictures.
Click image
Updated: 14th /Jun

Hi Mark
Finally back to building the boat, these are the only photos I could find that I have taken of my progress.
As you can see the seats are glued and glassed in, now to start on the outside.
I picked up a trailer cheap and had make sure it fit the boat.

Australian Designed

G'day everybody,
Here's the first of our next generation of our 4 new exciting designs now on the drawing board. Constructed from Strip Plank composite, or foam core, her moderate 14 degree deadrise "V" for a smooth ride, chine flats for stability and flaired bows, we look forward to yet another Bowdidge Marine signature design

Australian Designed
Updated: 13th /May
Latest New Design 4.57 (15ft) Centre Console
Coming Soon
Coming Soon
Click Image
Click Image
Jason's Mushulu 12
Updated: 23th /Jul
Good day guys ,
My 1st day at stipp planking  the boat .After just a few planks going on ,its showing off the shape well.
 
Eddie
Bruce's Mushulu 14 
To view his build pictures.
Click image
To view his build pictures.
Click image
Tony's Cruise Control 5.2
Updated: 14th /Jul
Hey Mark,
Heres a couple of more photos of the boat building progress.
Regards
Tony
Updated: 23rd /Jun

Hi there Mark and Debbie,
The frame and bulkhead I cut out yeserday and today I cut the other bulkhead and transom boards. There is a pic with a "stuff up" with my measurements, so the old measure twice and cut once is a definate.
I double checked and triple check. Just as  ... click image to see more

Wazza's Mushulu 12
To view his build pictures.
Updated: 24th /Jul
Hi Mark,
Well I have the running strakes installed as you can see from the photos.  My next task will be to fair the bottom and sides.  I am sure this will be a fun job.  I also put a layer of cloth on the aft outboard mounting plate.  Figured it would hold up better to wear and tear. Will be leaving to pull the crab pots if a few minutes.  We got our limits of 5 each yesterday.  Hope we are that lucky today.
Take care,
Chuck
Chucks Sandy Strait 14
To view his build pictures.
Click image