Marine Designs
We have boat plans (both yacht designs, catamaran designs and power designs) for all sizes. From the 12ft Mushulu Dinghy stitch & glue yacht tender to the Oceansky 57 catamaran. We design timber boats, plywood boats, strip plank boats, fibreglass composite boats, steel and aluminum boats to very modern styling for both monohull designs or multihull designs, powerboat or sailboat and in round bilge, multi-chine or radius chine hull forms.
With the best technical support: we will help you succeed!
All our plans come with full technical support and are Australian Builders plate compliant.
Marine Designs
We will respond immediately. At the same please visit our forum site, to share ideas about our boats and thousands of pictures - see completed boats and many of the building steps done by builders like you.
Also, all the fiberglass supplies required to build our boats are available at Bowdidge marine Designs, delivered to your door.
Designed Boat Plans
The kit include all the epoxy and fiberglass listed in our Bill Of Materials. FGI Epoxy Resin is a high performance marine resin specially formulated for our building method. It has a low viscosity and is ideal for fiberglass lamination. It wets the fiberglass evenly and fast. The mixing ratio is simple: 1 part volume of hardener to 5 parts volume of resin.
Information and tips can be found at our technical support web page.
No need to search all around town or to compare prices with generic epoxies: our kits prices also include shipping in the Eastern & Southern States of Australia!
Here is what is included:
-Epoxy Resin kit: 48 kg total (2 x 20kg Drums + Hardener)
-Cabosil or Glue Powder: 3 kg.
-Q-Cells or Fairing powder: 4Kg .
-200 gm (6oz) cloth Fabric: 48 m
Our price also includes shipping-
Please CONTACT US
Plus Shipping - $55
Fibreglass & Resin kit
We can also supply, on request, individual parts of the kit if required. (Build as you need)
More supplies, refills and custom kits:
Our kits contain enough resin and fiberglass to completely finish your boat. The quantities are based not only on our BOM calculations but also on years of experience and feedback from our builders. In many cases, we supply too much resin because it is more economical to buy a large quantity. We also include a 15% waste and you should not run out of resin, However, first time builders may need more resin. Some may want to fiberglass more than what we specify or double the layers. In those cases, where more quantities may be needed, please CONTACT US at BMD.
Aus $1579
